All tutorials

How to Add Sound Effects to a Video: Where and How Loud

Sound effects in talking-head videos follow three rules: a sound lands when something new arrives, you use 1 to 10 a minute, and nothing is louder than the voice. Here is which sound goes with which moment, how to add them by hand, and how Pireel adds them for you.

How to add sound effects to a video of someone talking comes down to three rules. A sound lands at the moment something new arrives. You use between 1 and 10 a minute, depending on the kind of video. And no sound is ever louder than the voice.

This guide covers those three rules first, then two ways to do it: by hand in your editor, or automatically in Pireel.

Where sound effects go

A sound effect tells the viewer that something new is here. In a talking-head video, six kinds of moment are worth a sound:

What happensWhich soundWhere it lands
You move to a new topic, or cut to a new sceneA transition, a quick whooshThe first word of the new part
A word, a picture or a card appearsA short appear soundThe moment it comes on
You tick off a few quick pointsA very light tickThe word for each point
A key point worth noticingA light accentThe start of the key word
A big claim, or the punchlineA heavy hitThat word
The seconds before a revealA build that risesIt starts a few seconds early and ends on the reveal

Three things to watch as you place them:

  • Line a sound up with the start of a word, not the end. Speech covers a sound that plays under it, so a sound is clearest at the instant a word begins, or in a pause.
  • Use one sound for one kind of moment. If a list has five items, all five get the same appear sound, and the video sounds like one set.
  • Leave jump cuts alone. A whoosh on every cut inside continuous talk wears the viewer out fast.

How many to use

DensityAbout how many a minuteGood for
Low1 to 2Explainers: a sound on the key lines only
Medium3 to 5Tutorials: the points and the rhythm
High6 to 10Fast shorts: following every change

These are also roughly what Pireel's three density settings place, so you can count against them when you work by hand.

When one stretch is full of candidates, say eight numbers in a row, do not give each a sound. Pick the two or three that matter most. No sound is always an option.

How loud

No sound goes above the voice. Pireel sets each one from the speech around it: a light accent at about 60% of the voice's level, an ordinary one at about 80%, and the heaviest hit still just under the voice.

By hand, pull the sound well below the voice first, then listen on headphones. If you can hear it and it does not talk over you, it is right. Then play it through a phone speaker. Low, heavy sounds often vanish there.

How to add sound effects by hand

It is the same three steps in any editor:

  1. Find the sounds. Start with the library built into your editor. If you download one, check that its license covers commercial use.
  2. Drag the sound onto an audio track under your voice. Zoom in on the timeline and line the start of the sound up with the start of the word's waveform.
  3. Set the level and listen from the top.

A one-minute video at medium density means lining up four or five sounds. On a long video, step 2 is where the time goes.

How to add sound effects in Pireel

1. Upload the video and choose a density

Open Add sound effects to video and upload your video. A talking head, a tutorial or a vlog all work. Sound effect density has three settings, Low, Medium and High, and starts on Medium.

To hear the sounds first, click any of them on the wall of sounds on that page.

2. Listen

Pireel reads what you say and puts sounds on the six kinds of moment above, at a level that follows your voice. Listen from the top and check that each sound lands where you wanted the emphasis.

If you do not like the set as a whole, click Match sounds again for a new one. It costs credits again.

3. Change just one

Click Agent Remix to open the video in Studio. Every sound is on the timeline, where you can swap, delete or move it. Or say what you want:

Remove the whoosh at the very start, and use a lighter accent on "the third point."

Background music works the same way: ask for it in Studio.

What it costs

It's charged by the length of the video, and a higher setting costs a little more. The page shows how many credits it will use before you start, and new accounts get free credits.

If it sounds wrong

What you hearWhyWhat to change
A sound covers your voiceIt is too loud, or it sits in the middle of a sentenceTurn it down, or move it to the start of the word or the pause before it
The whole video feels noisyToo many sounds, some of them on jump cutsGo down one density, and delete the ones on jump cuts first
It sounds messyOne kind of moment has several different soundsKeep one sound for each kind of moment
A sound is slightly off the pictureIt is lined up with the end of the word, or it misses the cutZoom in and line it up with the start of the waveform
You cannot hear it on a phoneThe sound is too low and heavySwap it for a brighter one

If the voice itself has hiss or hum, fix the noisy audio before adding sounds. If you want the picture to follow your points too, see B-roll for talking-head video.

Frequently asked questions

How many sound effects should a one-minute talking-head video have?

It depends on the video. An explainer takes 1 or 2, on the key lines only. A tutorial takes 3 to 5, and a fast short takes 6 to 10. Jump cuts inside continuous talk usually need none.

How loud should sound effects be?

Never louder than the voice. A light accent sits at about 60% of the level of the speech around it, and even the heaviest hit stays just under the voice. Listen on headphones: you should hear the sound without it talking over you.

Which sound effects do talking-head videos use?

Six kinds: a transition when the topic changes, an appear sound when text or a picture comes on, a tick for quick points, a light accent on a key word, a heavy hit on a big claim, and a build before a reveal.

Will sound effects cover my voice?

Not if they are placed well. Speech and a sound at the same moment fight each other, so a sound goes on the start of a word or in a pause, at a lower level than the voice.